jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 110 interface rf connector with switch, 3.9mm high, dc to 6ghz ms-147 series features 0 1. low insertion loss insertion loss is as low as: typically, 0.08db at 1ghz typically, 0.1db at 2ghz 0 2. space saving external dimensions are 5.8mm x 5.4mm. saves installation space. 03. low profile switch height is 3.9mm. 04. light weight switch weight is 0.11g 0 5. long life the switch is guaranteed for up to 12,000 mechanical operations. 0 6. auto insertable available in embossey tape-and-reel auto-insertable format 0 7. wide application range operating frequency from dc to 6ghz. 08. rohs compliant all components and materials comply with the requirements of the eu directive 2002/95/ec. 09. self-alignment the eccentricity for plug mating is 0.5mm. application * wireless communication (bluetooth, ieee 802.11) * machines (portable terminal, notebook pc, etc, pos terminal, gps terminal pda, etc.) * also suitable for other high-frequency machines. outline the ultra-small ms-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (sub- strates) (dc ?6ghz) used at high frequencies. to respond to the development of portable terminal technologies and popularization of high- frequency applications ?up to 6ghz ?this switch features low loss, low profile, and light weight. the switch circuit is designed so that the nc terminal is connected to the c terminal without a plug mated. mating with a plug opens this connection. vertical mounting structure allows the switch to be placed near the antenna of the portable terminal and used to inspect output and switch to an external antenna. saves board mounting space: low profile: height 3.9mm light weight: weight 0.11g ms-147 ( 06 ) ms-147-c ( lp ) -1 MS-147-HRMJ-1 plug sma conversion adapter the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 111 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz item standard conditions operating temperature range power rating frequency range insertion loss isolation v.s.w.r. center 75m ohms max. outer 50m ohms max. 100ma max. no electrical discontinuity for 10s min. frequency of 10 to 55 hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions acceleration of 490 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis contact resistance: center 100m ohms max. outer 75m ohms max. 12,000 cycles 1,000m ohms or more no flashover or insulation breakdown 100v dc 100v ac / one minute contact resistance: center 100m ohms max. outer 75m ohms max. insulation resistance 10m ohms min. temperature : C 55 ? +15 ? to +35 ? 85 ? +15? to +35? time:30 5 max. 30 5 max. 100 cycles 96 hours at temperature of 40? and humidity of 90% to 95% contact resistance: center 100m ohms max. outer 75m ohms max. no excessive corrosion exposed to 5% salt water solution for 48 hours(at + 35?) not mated with the plug C30 ? ~ + 85 ? 4 w dc ~ 6 ghz 0.15db max. (dc ~ 2ghz) 0.2db max. (2ghz ~ 3ghz) 0.4db max. (3ghz ~ 6ghz) 0.2db max. (dc ~ 2ghz) 0.3db max. (2ghz ~ 2.5ghz) 0.4db max. (2.5ghz ~ 3ghz) 0.8db max. (3ghz ~ 6ghz) 25db min. (dc ~ 1ghz) 20db min. (1ghz ~ 3ghz) 14db min. (3ghz ~ 6ghz) 1.2 max. (dc ~ 3ghz) 1.5 max. (3ghz ~ 6ghz) 1.25 max. (dc ~ 2ghz) 1.3 max. (2ghz ~ 2.5ghz) 1.4 max. (2.5ghz ~ 3ghz) 1.9 max. (3ghz ~ 6ghz) C 10 ? ~ + 65? 4 w dc ~ 6 ghz mared (MS-147-HRMJ-1) product specifications materials 1.contact resistance 2.insulation resistance 3.withstanding voltage 4. vibration 5. shock 6.humidity 7.temperature cycle 8.salt spray 9.durability (insertion/withdrawal) shell insulator common terminal board circuit side ( n.c ) terminal phosphor bronze polyamide resin berylium copper berylium copper gold plating _________ gold plating gold plating _________ ul94hb _________ _________ part material finish remarks the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 112 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz typical data insertion loss v.s.w.r. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 0.045 3.0 4.0 2.0 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 v.s.w.r. 1.0 1.2 1.4 1.6 1.8 2.0 0.045 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 3.0 4.0 2.0 isolation 45 40 35 30 25 0.045 6.0 [ghz] [db] 20 15 10 5 0 3.0 4.0 2.0 insertion loss v.s.w.r. v.s.w.r. insertion loss isolation open (n.o)2& $
3( isolation the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 113 receptacle product no. ms-147 (06) 1,500 pieces per reel embossed carrier tape dimensions circuit diagram ?13 ?380 ?80 2 16.4 12 4 16 7.5 1.75 ?1.5 2 unreeling direction 1,500 pieces per / reel unreeling direction 5.3 2-0.2 3.9 b 2.9 ?3.4 ?5 2.7 5.8 0.65 0.4 0.4 4.4 a g c g 5.4 ms-147 g b g c a plug g b g g g gg c a ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz part number ms-147 ( 06 ) ms-147 ( 01 ) hrs no. cl358-150-5-06 cl358-150-5-01 packaging 1,500 pieces / reel 50 pieces rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz 114 plug 13.6 13.7 ?1.8 10.2 ?4.8 11.25 7 8 right angle (1.5d-hqew) part no. ms-147-c(lp)-1 ms-147-c(lp)-4 hrs no. cl358-0155-9 cl358-0182-1 rohs yes b pcb mounting pattern b metal mask dimensions 0.8 4 6.6 3.6 0.65 0.8 2.4 6 4 6.6 3.6 0.65 5.85 3.8 0.8 0.8 sma conrersion adapters 6.3 1/4-36uns-2a 12 6.29 6 24.29 ?4.71 ms-147-sma jack conrersion adapters part no. MS-147-HRMJ-1 ms-147-hrmj-3 hrs no. cl358-0151-8 cl358-0218-7 rohs yes 8.3 6 6.8 2.7 ?3.4 15.5 part no. ms-147r-hrmj hrs no. cl358-0212-0 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 115 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz q max. temperature : 260 ? w duration of peak temperature : 5sec max. e base peak temperature : 240 ? ~ 255 ? r 220 ? or over : 50sec to 80sec max. t 180 ? to 200 ? : 120sec min. recommended temperature profile 5sec max. 0 100 180 200 260 220 120sec min. 50sec to 80sec temperature (?) 260? max. using typical solder paste o-ring example of application note: mounting example the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 116 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz precautions 1. plugs 2. not washable. 3. design the mounting holes with sufficient clearance to protect the switch from being subjected to excessive force should the board be dropped. 4. for rf interface application for portable terminals, cover the plug entry with a rubber cap to keep dust out when no plug is inserted. 5. be sure to fully insert the plug until it contacts part p. p recommended nozzle dimensions ?1 ?3 ?1.5 part no. ms-147-c(lp)-1 ms-147-c(lp)-4 MS-147-HRMJ-1 ms-147-hrmj-3 use plug harness type plug harness type sma conversion adapter sma conversion adapter effective mating length 0.87mm 0.87mm 0.87mm 0.87mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 110 interface rf connector with switch, 3.9mm high, dc to 6ghz ms-147 series features 0 1. low insertion loss insertion loss is as low as: typically, 0.08db at 1ghz typically, 0.1db at 2ghz 0 2. space saving external dimensions are 5.8mm x 5.4mm. saves installation space. 03. low profile switch height is 3.9mm. 04. light weight switch weight is 0.11g 0 5. long life the switch is guaranteed for up to 12,000 mechanical operations. 0 6. auto insertable available in embossey tape-and-reel auto-insertable format 0 7. wide application range operating frequency from dc to 6ghz. 08. rohs compliant all components and materials comply with the requirements of the eu directive 2002/95/ec. 09. self-alignment the eccentricity for plug mating is 0.5mm. application * wireless communication (bluetooth, ieee 802.11) * machines (portable terminal, notebook pc, etc, pos terminal, gps terminal pda, etc.) * also suitable for other high-frequency machines. outline the ultra-small ms-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (sub- strates) (dc ?6ghz) used at high frequencies. to respond to the development of portable terminal technologies and popularization of high- frequency applications ?up to 6ghz ?this switch features low loss, low profile, and light weight. the switch circuit is designed so that the nc terminal is connected to the c terminal without a plug mated. mating with a plug opens this connection. vertical mounting structure allows the switch to be placed near the antenna of the portable terminal and used to inspect output and switch to an external antenna. saves board mounting space: low profile: height 3.9mm light weight: weight 0.11g ms-147 ( 06 ) ms-147-c ( lp ) -1 MS-147-HRMJ-1 plug sma conversion adapter the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 111 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz item standard conditions operating temperature range power rating frequency range insertion loss isolation v.s.w.r. center 75m ohms max. outer 50m ohms max. 100ma max. no electrical discontinuity for 10s min. frequency of 10 to 55 hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions acceleration of 490 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis contact resistance: center 100m ohms max. outer 75m ohms max. 12,000 cycles 1,000m ohms or more no flashover or insulation breakdown 100v dc 100v ac / one minute contact resistance: center 100m ohms max. outer 75m ohms max. insulation resistance 10m ohms min. temperature : C 55 ? +15 ? to +35 ? 85 ? +15? to +35? time:30 5 max. 30 5 max. 100 cycles 96 hours at temperature of 40? and humidity of 90% to 95% contact resistance: center 100m ohms max. outer 75m ohms max. no excessive corrosion exposed to 5% salt water solution for 48 hours(at + 35?) not mated with the plug C30 ? ~ + 85 ? 4 w dc ~ 6 ghz 0.15db max. (dc ~ 2ghz) 0.2db max. (2ghz ~ 3ghz) 0.4db max. (3ghz ~ 6ghz) 0.2db max. (dc ~ 2ghz) 0.3db max. (2ghz ~ 2.5ghz) 0.4db max. (2.5ghz ~ 3ghz) 0.8db max. (3ghz ~ 6ghz) 25db min. (dc ~ 1ghz) 20db min. (1ghz ~ 3ghz) 14db min. (3ghz ~ 6ghz) 1.2 max. (dc ~ 3ghz) 1.5 max. (3ghz ~ 6ghz) 1.25 max. (dc ~ 2ghz) 1.3 max. (2ghz ~ 2.5ghz) 1.4 max. (2.5ghz ~ 3ghz) 1.9 max. (3ghz ~ 6ghz) C 10 ? ~ + 65? 4 w dc ~ 6 ghz mared (MS-147-HRMJ-1) product specifications materials 1.contact resistance 2.insulation resistance 3.withstanding voltage 4. vibration 5. shock 6.humidity 7.temperature cycle 8.salt spray 9.durability (insertion/withdrawal) shell insulator common terminal board circuit side ( n.c ) terminal phosphor bronze polyamide resin berylium copper berylium copper gold plating _________ gold plating gold plating _________ ul94hb _________ _________ part material finish remarks the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 112 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz typical data insertion loss v.s.w.r. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 0.045 3.0 4.0 2.0 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 v.s.w.r. 1.0 1.2 1.4 1.6 1.8 2.0 0.045 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 3.0 4.0 2.0 isolation 45 40 35 30 25 0.045 6.0 [ghz] [db] 20 15 10 5 0 3.0 4.0 2.0 insertion loss v.s.w.r. v.s.w.r. insertion loss isolation normally closed (n.c)~ (not mated with the plug) open (n.o)~ (mated with the plug) isolation the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 113 receptacle product no. ms-147 (06) 1,500 pieces per reel embossed carrier tape dimensions circuit diagram ?13 ?380 ?80 2 16.4 12 4 16 7.5 1.75 ?1.5 2 unreeling direction 1,500 pieces per / reel unreeling direction 5.3 2-0.2 3.9 b 2.9 ?3.4 ?5 2.7 5.8 0.65 0.4 0.4 4.4 a g c g 5.4 ms-147 g b g c a plug g b g g g gg c a ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz part number ms-147 ( 06 ) ms-147 ( 01 ) hrs no. cl358-150-5-06 cl358-150-5-01 packaging 1,500 pieces / reel 50 pieces rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz 114 plug 13.6 13.7 ?1.8 10.2 ?4.8 11.25 7 8 right angle (1.5d-hqew) part no. ms-147-c(lp)-1 ms-147-c(lp)-4 hrs no. cl358-0155-9 cl358-0182-1 rohs yes b pcb mounting pattern b metal mask dimensions 0.8 4 6.6 3.6 0.65 0.8 2.4 6 4 6.6 3.6 0.65 5.85 3.8 0.8 0.8 sma conrersion adapters 6.3 1/4-36uns-2a 12 6.29 6 24.29 ?4.71 ms-147-sma jack conrersion adapters part no. MS-147-HRMJ-1 ms-147-hrmj-3 hrs no. cl358-0151-8 cl358-0218-7 rohs yes 8.3 6 6.8 2.7 ?3.4 15.5 part no. ms-147r-hrmj hrs no. cl358-0212-0 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 115 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz q max. temperature : 260 ? w duration of peak temperature : 5sec max. e base peak temperature : 240 ? ~ 255 ? r 220 ? or over : 50sec to 80sec max. t 180 ? to 200 ? : 120sec min. recommended temperature profile 5sec max. 0 100 180 200 260 220 120sec min. 50sec to 80sec temperature (?) 260? max. using typical solder paste o-ring example of application note: mounting example the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 116 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz precautions 1. plugs 2. not washable. 3. design the mounting holes with sufficient clearance to protect the switch from being subjected to excessive force should the board be dropped. 4. for rf interface application for portable terminals, cover the plug entry with a rubber cap to keep dust out when no plug is inserted. 5. be sure to fully insert the plug until it contacts part p. p recommended nozzle dimensions ?1 ?3 ?1.5 part no. ms-147-c(lp)-1 ms-147-c(lp)-4 MS-147-HRMJ-1 ms-147-hrmj-3 use plug harness type plug harness type sma conversion adapter sma conversion adapter effective mating length 0.87mm 0.87mm 0.87mm 0.87mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 110 interface rf connector with switch, 3.9mm high, dc to 6ghz ms-147 series features 0 1. low insertion loss insertion loss is as low as: typically, 0.08db at 1ghz typically, 0.1db at 2ghz 0 2. space saving external dimensions are 5.8mm x 5.4mm. saves installation space. 03. low profile switch height is 3.9mm. 04. light weight switch weight is 0.11g 0 5. long life the switch is guaranteed for up to 12,000 mechanical operations. 0 6. auto insertable available in embossey tape-and-reel auto-insertable format 0 7. wide application range operating frequency from dc to 6ghz. 08. rohs compliant all components and materials comply with the requirements of the eu directive 2002/95/ec. 09. self-alignment the eccentricity for plug mating is 0.5mm. application * wireless communication (bluetooth, ieee 802.11) * machines (portable terminal, notebook pc, etc, pos terminal, gps terminal pda, etc.) * also suitable for other high-frequency machines. outline the ultra-small ms-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (sub- strates) (dc ?6ghz) used at high frequencies. to respond to the development of portable terminal technologies and popularization of high- frequency applications ?up to 6ghz ?this switch features low loss, low profile, and light weight. the switch circuit is designed so that the nc terminal is connected to the c terminal without a plug mated. mating with a plug opens this connection. vertical mounting structure allows the switch to be placed near the antenna of the portable terminal and used to inspect output and switch to an external antenna. saves board mounting space: low profile: height 3.9mm light weight: weight 0.11g ms-147 ( 06 ) ms-147-c ( lp ) -1 MS-147-HRMJ-1 plug sma conversion adapter the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 111 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz item standard conditions operating temperature range power rating frequency range insertion loss isolation v.s.w.r. center 75m ohms max. outer 50m ohms max. 100ma max. no electrical discontinuity for 10s min. frequency of 10 to 55 hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions acceleration of 490 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis contact resistance: center 100m ohms max. outer 75m ohms max. 12,000 cycles 1,000m ohms or more no flashover or insulation breakdown 100v dc 100v ac / one minute contact resistance: center 100m ohms max. outer 75m ohms max. insulation resistance 10m ohms min. temperature : C 55 ? +15 ? to +35 ? 85 ? +15? to +35? time:30 5 max. 30 5 max. 100 cycles 96 hours at temperature of 40? and humidity of 90% to 95% contact resistance: center 100m ohms max. outer 75m ohms max. no excessive corrosion exposed to 5% salt water solution for 48 hours(at + 35?) not mated with the plug C30 ? ~ + 85 ? 4 w dc ~ 6 ghz 0.15db max. (dc ~ 2ghz) 0.2db max. (2ghz ~ 3ghz) 0.4db max. (3ghz ~ 6ghz) 0.2db max. (dc ~ 2ghz) 0.3db max. (2ghz ~ 2.5ghz) 0.4db max. (2.5ghz ~ 3ghz) 0.8db max. (3ghz ~ 6ghz) 25db min. (dc ~ 1ghz) 20db min. (1ghz ~ 3ghz) 14db min. (3ghz ~ 6ghz) 1.2 max. (dc ~ 3ghz) 1.5 max. (3ghz ~ 6ghz) 1.25 max. (dc ~ 2ghz) 1.3 max. (2ghz ~ 2.5ghz) 1.4 max. (2.5ghz ~ 3ghz) 1.9 max. (3ghz ~ 6ghz) C 10 ? ~ + 65? 4 w dc ~ 6 ghz mared (MS-147-HRMJ-1) product specifications materials 1.contact resistance 2.insulation resistance 3.withstanding voltage 4. vibration 5. shock 6.humidity 7.temperature cycle 8.salt spray 9.durability (insertion/withdrawal) shell insulator common terminal board circuit side ( n.c ) terminal phosphor bronze polyamide resin berylium copper berylium copper gold plating _________ gold plating gold plating _________ ul94hb _________ _________ part material finish remarks the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 112 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz typical data insertion loss v.s.w.r. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 0.045 3.0 4.0 2.0 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 v.s.w.r. 1.0 1.2 1.4 1.6 1.8 2.0 0.045 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 3.0 4.0 2.0 isolation 45 40 35 30 25 0.045 6.0 [ghz] [db] 20 15 10 5 0 3.0 4.0 2.0 insertion loss v.s.w.r. v.s.w.r. insertion loss isolation normally closed (n.c)~ (not mated with the plug) open (n.o)~ (mated with the plug) isolation the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 113 receptacle product no. ms-147 (06) 1,500 pieces per reel embossed carrier tape dimensions circuit diagram ?13 ?380 ?80 2 16.4 12 4 16 7.5 1.75 ?1.5 2 unreeling direction 1,500 pieces per / reel unreeling direction 5.3 2-0.2 3.9 b 2.9 ?3.4 ?5 2.7 5.8 0.65 0.4 0.4 4.4 a g c g 5.4 ms-147 g b g c a plug g b g g g gg c a ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz part number ms-147 ( 06 ) ms-147 ( 01 ) hrs no. cl358-150-5-06 cl358-150-5-01 packaging 1,500 pieces / reel 50 pieces rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz 114 plug 13.6 13.7 ?1.8 10.2 ?4.8 11.25 7 8 right angle (1.5d-hqew) part no. ms-147-c(lp)-1 ms-147-c(lp)-4 hrs no. cl358-0155-9 cl358-0182-1 rohs yes b pcb mounting pattern b metal mask dimensions 0.8 4 6.6 3.6 0.65 0.8 2.4 6 4 6.6 3.6 0.65 5.85 3.8 0.8 0.8 sma conrersion adapters 6.3 1/4-36uns-2a 12 6.29 6 24.29 ?4.71 ms-147-sma jack conrersion adapters part no. MS-147-HRMJ-1 ms-147-hrmj-3 hrs no. cl358-0151-8 cl358-0218-7 rohs yes 8.3 6 6.8 2.7 ?3.4 15.5 part no. ms-147r-hrmj hrs no. cl358-0212-0 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 115 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz q max. temperature : 260 ? w duration of peak temperature : 5sec max. e base peak temperature : 240 ? ~ 255 ? r 220 ? or over : 50sec to 80sec max. t 180 ? to 200 ? : 120sec min. recommended temperature profile 5sec max. 0 100 180 200 260 220 120sec min. 50sec to 80sec temperature (?) 260? max. using typical solder paste o-ring example of application note: mounting example the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 116 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz precautions 1. plugs 2. not washable. 3. design the mounting holes with sufficient clearance to protect the switch from being subjected to excessive force should the board be dropped. 4. for rf interface application for portable terminals, cover the plug entry with a rubber cap to keep dust out when no plug is inserted. 5. be sure to fully insert the plug until it contacts part p. p recommended nozzle dimensions ?1 ?3 ?1.5 part no. ms-147-c(lp)-1 ms-147-c(lp)-4 MS-147-HRMJ-1 ms-147-hrmj-3 use plug harness type plug harness type sma conversion adapter sma conversion adapter effective mating length 0.87mm 0.87mm 0.87mm 0.87mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 110 interface rf connector with switch, 3.9mm high, dc to 6ghz ms-147 series features 0 1. low insertion loss insertion loss is as low as: typically, 0.08db at 1ghz typically, 0.1db at 2ghz 0 2. space saving external dimensions are 5.8mm x 5.4mm. saves installation space. 03. low profile switch height is 3.9mm. 04. light weight switch weight is 0.11g 0 5. long life the switch is guaranteed for up to 12,000 mechanical operations. 0 6. auto insertable available in embossey tape-and-reel auto-insertable format 0 7. wide application range operating frequency from dc to 6ghz. 08. rohs compliant all components and materials comply with the requirements of the eu directive 2002/95/ec. 09. self-alignment the eccentricity for plug mating is 0.5mm. application * wireless communication (bluetooth, ieee 802.11) * machines (portable terminal, notebook pc, etc, pos terminal, gps terminal pda, etc.) * also suitable for other high-frequency machines. outline the ultra-small ms-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (sub- strates) (dc ?6ghz) used at high frequencies. to respond to the development of portable terminal technologies and popularization of high- frequency applications ?up to 6ghz ?this switch features low loss, low profile, and light weight. the switch circuit is designed so that the nc terminal is connected to the c terminal without a plug mated. mating with a plug opens this connection. vertical mounting structure allows the switch to be placed near the antenna of the portable terminal and used to inspect output and switch to an external antenna. saves board mounting space: low profile: height 3.9mm light weight: weight 0.11g ms-147 ( 06 ) ms-147-c ( lp ) -1 MS-147-HRMJ-1 plug sma conversion adapter the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 111 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz item standard conditions operating temperature range power rating frequency range insertion loss isolation v.s.w.r. center 75m ohms max. outer 50m ohms max. 100ma max. no electrical discontinuity for 10s min. frequency of 10 to 55 hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions acceleration of 490 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis contact resistance: center 100m ohms max. outer 75m ohms max. 12,000 cycles 1,000m ohms or more no flashover or insulation breakdown 100v dc 100v ac / one minute contact resistance: center 100m ohms max. outer 75m ohms max. insulation resistance 10m ohms min. temperature : C 55 ? +15 ? to +35 ? 85 ? +15? to +35? time:30 5 max. 30 5 max. 100 cycles 96 hours at temperature of 40? and humidity of 90% to 95% contact resistance: center 100m ohms max. outer 75m ohms max. no excessive corrosion exposed to 5% salt water solution for 48 hours(at + 35?) not mated with the plug C30 ? ~ + 85 ? 4 w dc ~ 6 ghz 0.15db max. (dc ~ 2ghz) 0.2db max. (2ghz ~ 3ghz) 0.4db max. (3ghz ~ 6ghz) 0.2db max. (dc ~ 2ghz) 0.3db max. (2ghz ~ 2.5ghz) 0.4db max. (2.5ghz ~ 3ghz) 0.8db max. (3ghz ~ 6ghz) 25db min. (dc ~ 1ghz) 20db min. (1ghz ~ 3ghz) 14db min. (3ghz ~ 6ghz) 1.2 max. (dc ~ 3ghz) 1.5 max. (3ghz ~ 6ghz) 1.25 max. (dc ~ 2ghz) 1.3 max. (2ghz ~ 2.5ghz) 1.4 max. (2.5ghz ~ 3ghz) 1.9 max. (3ghz ~ 6ghz) C 10 ? ~ + 65? 4 w dc ~ 6 ghz mared (MS-147-HRMJ-1) product specifications materials 1.contact resistance 2.insulation resistance 3.withstanding voltage 4. vibration 5. shock 6.humidity 7.temperature cycle 8.salt spray 9.durability (insertion/withdrawal) shell insulator common terminal board circuit side ( n.c ) terminal phosphor bronze polyamide resin berylium copper berylium copper gold plating _________ gold plating gold plating _________ ul94hb _________ _________ part material finish remarks the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 112 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz typical data insertion loss v.s.w.r. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 0.045 3.0 4.0 2.0 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 v.s.w.r. 1.0 1.2 1.4 1.6 1.8 2.0 0.045 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 3.0 4.0 2.0 isolation 45 40 35 30 25 0.045 6.0 [ghz] [db] 20 15 10 5 0 3.0 4.0 2.0 insertion loss v.s.w.r. v.s.w.r. insertion loss isolation normally closed (n.c)~ (not mated with the plug) open (n.o)~ (mated with the plug) isolation the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 113 receptacle product no. ms-147 (06) 1,500 pieces per reel embossed carrier tape dimensions circuit diagram ?13 ?380 ?80 2 16.4 12 4 16 7.5 1.75 ?1.5 2 unreeling direction 1,500 pieces per / reel unreeling direction 5.3 2-0.2 3.9 b 2.9 ?3.4 ?5 2.7 5.8 0.65 0.4 0.4 4.4 a g c g 5.4 ms-147 g b g c a plug g b g g g gg c a ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz part number ms-147 ( 06 ) ms-147 ( 01 ) hrs no. cl358-150-5-06 cl358-150-5-01 packaging 1,500 pieces / reel 50 pieces rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz 114 plug 13.6 13.7 ?1.8 10.2 ?4.8 11.25 7 8 right angle (1.5d-hqew) part no. ms-147-c(lp)-1 ms-147-c(lp)-4 hrs no. cl358-0155-9 cl358-0182-1 rohs yes b pcb mounting pattern b metal mask dimensions 0.8 4 6.6 3.6 0.65 0.8 2.4 6 4 6.6 3.6 0.65 5.85 3.8 0.8 0.8 sma conrersion adapters 6.3 1/4-36uns-2a 12 6.29 6 24.29 ?4.71 ms-147-sma jack conrersion adapters part no. MS-147-HRMJ-1 ms-147-hrmj-3 hrs no. cl358-0151-8 cl358-0218-7 rohs yes 8.3 6 6.8 2.7 ?3.4 15.5 part no. ms-147r-hrmj hrs no. cl358-0212-0 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 115 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz q max. temperature : 260 ? w duration of peak temperature : 5sec max. e base peak temperature : 240 ? ~ 255 ? r 220 ? or over : 50sec to 80sec max. t 180 ? to 200 ? : 120sec min. recommended temperature profile 5sec max. 0 100 180 200 260 220 120sec min. 50sec to 80sec temperature (?) 260? max. using typical solder paste o-ring example of application note: mounting example the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 116 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz precautions 1. plugs 2. not washable. 3. design the mounting holes with sufficient clearance to protect the switch from being subjected to excessive force should the board be dropped. 4. for rf interface application for portable terminals, cover the plug entry with a rubber cap to keep dust out when no plug is inserted. 5. be sure to fully insert the plug until it contacts part p. p recommended nozzle dimensions ?1 ?3 ?1.5 part no. ms-147-c(lp)-1 ms-147-c(lp)-4 MS-147-HRMJ-1 ms-147-hrmj-3 use plug harness type plug harness type sma conversion adapter sma conversion adapter effective mating length 0.87mm 0.87mm 0.87mm 0.87mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 110 interface rf connector with switch, 3.9mm high, dc to 6ghz ms-147 series features 0 1. low insertion loss insertion loss is as low as: typically, 0.08db at 1ghz typically, 0.1db at 2ghz 0 2. space saving external dimensions are 5.8mm x 5.4mm. saves installation space. 03. low profile switch height is 3.9mm. 04. light weight switch weight is 0.11g 0 5. long life the switch is guaranteed for up to 12,000 mechanical operations. 0 6. auto insertable available in embossey tape-and-reel auto-insertable format 0 7. wide application range operating frequency from dc to 6ghz. 08. rohs compliant all components and materials comply with the requirements of the eu directive 2002/95/ec. 09. self-alignment the eccentricity for plug mating is 0.5mm. application * wireless communication (bluetooth, ieee 802.11) * machines (portable terminal, notebook pc, etc, pos terminal, gps terminal pda, etc.) * also suitable for other high-frequency machines. outline the ultra-small ms-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (sub- strates) (dc ?6ghz) used at high frequencies. to respond to the development of portable terminal technologies and popularization of high- frequency applications ?up to 6ghz ?this switch features low loss, low profile, and light weight. the switch circuit is designed so that the nc terminal is connected to the c terminal without a plug mated. mating with a plug opens this connection. vertical mounting structure allows the switch to be placed near the antenna of the portable terminal and used to inspect output and switch to an external antenna. saves board mounting space: low profile: height 3.9mm light weight: weight 0.11g ms-147 ( 06 ) ms-147-c ( lp ) -1 MS-147-HRMJ-1 plug sma conversion adapter the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 111 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz item standard conditions operating temperature range power rating frequency range insertion loss isolation v.s.w.r. center 75m ohms max. outer 50m ohms max. 100ma max. no electrical discontinuity for 10s min. frequency of 10 to 55 hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions acceleration of 490 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis contact resistance: center 100m ohms max. outer 75m ohms max. 12,000 cycles 1,000m ohms or more no flashover or insulation breakdown 100v dc 100v ac / one minute contact resistance: center 100m ohms max. outer 75m ohms max. insulation resistance 10m ohms min. temperature : C 55 ? +15 ? to +35 ? 85 ? +15? to +35? time:30 5 max. 30 5 max. 100 cycles 96 hours at temperature of 40? and humidity of 90% to 95% contact resistance: center 100m ohms max. outer 75m ohms max. no excessive corrosion exposed to 5% salt water solution for 48 hours(at + 35?) not mated with the plug C30 ? ~ + 85 ? 4 w dc ~ 6 ghz 0.15db max. (dc ~ 2ghz) 0.2db max. (2ghz ~ 3ghz) 0.4db max. (3ghz ~ 6ghz) 0.2db max. (dc ~ 2ghz) 0.3db max. (2ghz ~ 2.5ghz) 0.4db max. (2.5ghz ~ 3ghz) 0.8db max. (3ghz ~ 6ghz) 25db min. (dc ~ 1ghz) 20db min. (1ghz ~ 3ghz) 14db min. (3ghz ~ 6ghz) 1.2 max. (dc ~ 3ghz) 1.5 max. (3ghz ~ 6ghz) 1.25 max. (dc ~ 2ghz) 1.3 max. (2ghz ~ 2.5ghz) 1.4 max. (2.5ghz ~ 3ghz) 1.9 max. (3ghz ~ 6ghz) C 10 ? ~ + 65? 4 w dc ~ 6 ghz mared (MS-147-HRMJ-1) product specifications materials 1.contact resistance 2.insulation resistance 3.withstanding voltage 4. vibration 5. shock 6.humidity 7.temperature cycle 8.salt spray 9.durability (insertion/withdrawal) shell insulator common terminal board circuit side ( n.c ) terminal phosphor bronze polyamide resin berylium copper berylium copper gold plating _________ gold plating gold plating _________ ul94hb _________ _________ part material finish remarks the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 112 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz typical data insertion loss v.s.w.r. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 0.045 3.0 4.0 2.0 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 v.s.w.r. 1.0 1.2 1.4 1.6 1.8 2.0 0.045 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 3.0 4.0 2.0 isolation 45 40 35 30 25 0.045 6.0 [ghz] [db] 20 15 10 5 0 3.0 4.0 2.0 insertion loss v.s.w.r. v.s.w.r. insertion loss isolation normally closed (n.c)~ (not mated with the plug) open (n.o)~ (mated with the plug) isolation the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 113 receptacle product no. ms-147 (06) 1,500 pieces per reel embossed carrier tape dimensions circuit diagram ?13 ?380 ?80 2 16.4 12 4 16 7.5 1.75 ?1.5 2 unreeling direction 1,500 pieces per / reel unreeling direction 5.3 2-0.2 3.9 b 2.9 ?3.4 ?5 2.7 5.8 0.65 0.4 0.4 4.4 a g c g 5.4 ms-147 g b g c a plug g b g g g gg c a ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz part number ms-147 ( 06 ) ms-147 ( 01 ) hrs no. cl358-150-5-06 cl358-150-5-01 packaging 1,500 pieces / reel 50 pieces rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz 114 plug 13.6 13.7 ?1.8 10.2 ?4.8 11.25 7 8 right angle (1.5d-hqew) part no. ms-147-c(lp)-1 ms-147-c(lp)-4 hrs no. cl358-0155-9 cl358-0182-1 rohs yes b pcb mounting pattern b metal mask dimensions 0.8 4 6.6 3.6 0.65 0.8 2.4 6 4 6.6 3.6 0.65 5.85 3.8 0.8 0.8 sma conrersion adapters 6.3 1/4-36uns-2a 12 6.29 6 24.29 ?4.71 ms-147-sma jack conrersion adapters part no. MS-147-HRMJ-1 ms-147-hrmj-3 hrs no. cl358-0151-8 cl358-0218-7 rohs yes 8.3 6 6.8 2.7 ?3.4 15.5 part no. ms-147r-hrmj hrs no. cl358-0212-0 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 115 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz q max. temperature : 260 ? w duration of peak temperature : 5sec max. e base peak temperature : 240 ? ~ 255 ? r 220 ? or over : 50sec to 80sec max. t 180 ? to 200 ? : 120sec min. recommended temperature profile 5sec max. 0 100 180 200 260 220 120sec min. 50sec to 80sec temperature (?) 260? max. using typical solder paste o-ring example of application note: mounting example the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 116 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz precautions 1. plugs 2. not washable. 3. design the mounting holes with sufficient clearance to protect the switch from being subjected to excessive force should the board be dropped. 4. for rf interface application for portable terminals, cover the plug entry with a rubber cap to keep dust out when no plug is inserted. 5. be sure to fully insert the plug until it contacts part p. p recommended nozzle dimensions ?1 ?3 ?1.5 part no. ms-147-c(lp)-1 ms-147-c(lp)-4 MS-147-HRMJ-1 ms-147-hrmj-3 use plug harness type plug harness type sma conversion adapter sma conversion adapter effective mating length 0.87mm 0.87mm 0.87mm 0.87mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 110 interface rf connector with switch, 3.9mm high, dc to 6ghz ms-147 series features 0 1. low insertion loss insertion loss is as low as: typically, 0.08db at 1ghz typically, 0.1db at 2ghz 0 2. space saving external dimensions are 5.8mm x 5.4mm. saves installation space. 03. low profile switch height is 3.9mm. 04. light weight switch weight is 0.11g 0 5. long life the switch is guaranteed for up to 12,000 mechanical operations. 0 6. auto insertable available in embossey tape-and-reel auto-insertable format 0 7. wide application range operating frequency from dc to 6ghz. 08. rohs compliant all components and materials comply with the requirements of the eu directive 2002/95/ec. 09. self-alignment the eccentricity for plug mating is 0.5mm. application * wireless communication (bluetooth, ieee 802.11) * machines (portable terminal, notebook pc, etc, pos terminal, gps terminal pda, etc.) * also suitable for other high-frequency machines. outline the ultra-small ms-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (sub- strates) (dc ?6ghz) used at high frequencies. to respond to the development of portable terminal technologies and popularization of high- frequency applications ?up to 6ghz ?this switch features low loss, low profile, and light weight. the switch circuit is designed so that the nc terminal is connected to the c terminal without a plug mated. mating with a plug opens this connection. vertical mounting structure allows the switch to be placed near the antenna of the portable terminal and used to inspect output and switch to an external antenna. saves board mounting space: low profile: height 3.9mm light weight: weight 0.11g ms-147 ( 06 ) ms-147-c ( lp ) -1 MS-147-HRMJ-1 plug sma conversion adapter the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 111 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz item standard conditions operating temperature range power rating frequency range insertion loss isolation v.s.w.r. center 75m ohms max. outer 50m ohms max. 100ma max. no electrical discontinuity for 10s min. frequency of 10 to 55 hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions acceleration of 490 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis contact resistance: center 100m ohms max. outer 75m ohms max. 12,000 cycles 1,000m ohms or more no flashover or insulation breakdown 100v dc 100v ac / one minute contact resistance: center 100m ohms max. outer 75m ohms max. insulation resistance 10m ohms min. temperature : C 55 ? +15 ? to +35 ? 85 ? +15? to +35? time:30 5 max. 30 5 max. 100 cycles 96 hours at temperature of 40? and humidity of 90% to 95% contact resistance: center 100m ohms max. outer 75m ohms max. no excessive corrosion exposed to 5% salt water solution for 48 hours(at + 35?) not mated with the plug C30 ? ~ + 85 ? 4 w dc ~ 6 ghz 0.15db max. (dc ~ 2ghz) 0.2db max. (2ghz ~ 3ghz) 0.4db max. (3ghz ~ 6ghz) 0.2db max. (dc ~ 2ghz) 0.3db max. (2ghz ~ 2.5ghz) 0.4db max. (2.5ghz ~ 3ghz) 0.8db max. (3ghz ~ 6ghz) 25db min. (dc ~ 1ghz) 20db min. (1ghz ~ 3ghz) 14db min. (3ghz ~ 6ghz) 1.2 max. (dc ~ 3ghz) 1.5 max. (3ghz ~ 6ghz) 1.25 max. (dc ~ 2ghz) 1.3 max. (2ghz ~ 2.5ghz) 1.4 max. (2.5ghz ~ 3ghz) 1.9 max. (3ghz ~ 6ghz) C 10 ? ~ + 65? 4 w dc ~ 6 ghz mared (MS-147-HRMJ-1) product specifications materials 1.contact resistance 2.insulation resistance 3.withstanding voltage 4. vibration 5. shock 6.humidity 7.temperature cycle 8.salt spray 9.durability (insertion/withdrawal) shell insulator common terminal board circuit side ( n.c ) terminal phosphor bronze polyamide resin berylium copper berylium copper gold plating _________ gold plating gold plating _________ ul94hb _________ _________ part material finish remarks the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 112 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz typical data insertion loss v.s.w.r. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 0.045 3.0 4.0 2.0 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 v.s.w.r. 1.0 1.2 1.4 1.6 1.8 2.0 0.045 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 3.0 4.0 2.0 isolation 45 40 35 30 25 0.045 6.0 [ghz] [db] 20 15 10 5 0 3.0 4.0 2.0 insertion loss v.s.w.r. v.s.w.r. insertion loss isolation normally closed (n.c)~ (not mated with the plug) open (n.o)~ (mated with the plug) isolation the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 113 receptacle product no. ms-147 (06) 1,500 pieces per reel embossed carrier tape dimensions circuit diagram ?13 ?380 ?80 2 16.4 12 4 16 7.5 1.75 ?1.5 2 unreeling direction 1,500 pieces per / reel unreeling direction 5.3 2-0.2 3.9 b 2.9 ?3.4 ?5 2.7 5.8 0.65 0.4 0.4 4.4 a g c g 5.4 ms-147 g b g c a plug g b g g g gg c a ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz part number ms-147 ( 06 ) ms-147 ( 01 ) hrs no. cl358-150-5-06 cl358-150-5-01 packaging 1,500 pieces / reel 50 pieces rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz 114 plug 13.6 13.7 ?1.8 10.2 ?4.8 11.25 7 8 right angle (1.5d-hqew) part no. ms-147-c(lp)-1 ms-147-c(lp)-4 hrs no. cl358-0155-9 cl358-0182-1 rohs yes b pcb mounting pattern b metal mask dimensions 0.8 4 6.6 3.6 0.65 0.8 2.4 6 4 6.6 3.6 0.65 5.85 3.8 0.8 0.8 sma conrersion adapters 6.3 1/4-36uns-2a 12 6.29 6 24.29 ?4.71 ms-147-sma jack conrersion adapters part no. MS-147-HRMJ-1 ms-147-hrmj-3 hrs no. cl358-0151-8 cl358-0218-7 rohs yes 8.3 6 6.8 2.7 ?3.4 15.5 part no. ms-147r-hrmj hrs no. cl358-0212-0 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 115 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz q max. temperature : 260 ? w duration of peak temperature : 5sec max. e base peak temperature : 240 ? ~ 255 ? r 220 ? or over : 50sec to 80sec max. t 180 ? to 200 ? : 120sec min. recommended temperature profile 5sec max. 0 100 180 200 260 220 120sec min. 50sec to 80sec temperature (?) 260? max. using typical solder paste o-ring example of application note: mounting example the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 116 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz precautions 1. plugs 2. not washable. 3. design the mounting holes with sufficient clearance to protect the switch from being subjected to excessive force should the board be dropped. 4. for rf interface application for portable terminals, cover the plug entry with a rubber cap to keep dust out when no plug is inserted. 5. be sure to fully insert the plug until it contacts part p. p recommended nozzle dimensions ?1 ?3 ?1.5 part no. ms-147-c(lp)-1 ms-147-c(lp)-4 MS-147-HRMJ-1 ms-147-hrmj-3 use plug harness type plug harness type sma conversion adapter sma conversion adapter effective mating length 0.87mm 0.87mm 0.87mm 0.87mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) 110 interface rf connector with switch, 3.9mm high, dc to 6ghz ms-147 series features 0 1. low insertion loss insertion loss is as low as: typically, 0.08db at 1ghz typically, 0.1db at 2ghz 0 2. space saving external dimensions are 5.8mm x 5.4mm. saves installation space. 03. low profile switch height is 3.9mm. 04. light weight switch weight is 0.11g 0 5. long life the switch is guaranteed for up to 12,000 mechanical operations. 0 6. auto insertable available in embossey tape-and-reel auto-insertable format 0 7. wide application range operating frequency from dc to 6ghz. 08. rohs compliant all components and materials comply with the requirements of the eu directive 2002/95/ec. 09. self-alignment the eccentricity for plug mating is 0.5mm. application * wireless communication (bluetooth, ieee 802.11) * machines (portable terminal, notebook pc, etc, pos terminal, gps terminal pda, etc.) * also suitable for other high-frequency machines. outline the ultra-small ms-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (sub- strates) (dc ?6ghz) used at high frequencies. to respond to the development of portable terminal technologies and popularization of high- frequency applications ?up to 6ghz ?this switch features low loss, low profile, and light weight. the switch circuit is designed so that the nc terminal is connected to the c terminal without a plug mated. mating with a plug opens this connection. vertical mounting structure allows the switch to be placed near the antenna of the portable terminal and used to inspect output and switch to an external antenna. saves board mounting space: low profile: height 3.9mm light weight: weight 0.11g ms-147 ( 06 ) ms-147-c ( lp ) -1 MS-147-HRMJ-1 plug sma conversion adapter the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 111 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz item standard conditions operating temperature range power rating frequency range insertion loss isolation v.s.w.r. center 75m ohms max. outer 50m ohms max. 100ma max. no electrical discontinuity for 10s min. frequency of 10 to 55 hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions acceleration of 490 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis contact resistance: center 100m ohms max. outer 75m ohms max. 12,000 cycles 1,000m ohms or more no flashover or insulation breakdown 100v dc 100v ac / one minute contact resistance: center 100m ohms max. outer 75m ohms max. insulation resistance 10m ohms min. temperature : C 55 ? +15 ? to +35 ? 85 ? +15? to +35? time:30 5 max. 30 5 max. 100 cycles 96 hours at temperature of 40? and humidity of 90% to 95% contact resistance: center 100m ohms max. outer 75m ohms max. no excessive corrosion exposed to 5% salt water solution for 48 hours(at + 35?) not mated with the plug C30 ? ~ + 85 ? 4 w dc ~ 6 ghz 0.15db max. (dc ~ 2ghz) 0.2db max. (2ghz ~ 3ghz) 0.4db max. (3ghz ~ 6ghz) 0.2db max. (dc ~ 2ghz) 0.3db max. (2ghz ~ 2.5ghz) 0.4db max. (2.5ghz ~ 3ghz) 0.8db max. (3ghz ~ 6ghz) 25db min. (dc ~ 1ghz) 20db min. (1ghz ~ 3ghz) 14db min. (3ghz ~ 6ghz) 1.2 max. (dc ~ 3ghz) 1.5 max. (3ghz ~ 6ghz) 1.25 max. (dc ~ 2ghz) 1.3 max. (2ghz ~ 2.5ghz) 1.4 max. (2.5ghz ~ 3ghz) 1.9 max. (3ghz ~ 6ghz) C 10 ? ~ + 65? 4 w dc ~ 6 ghz mared (MS-147-HRMJ-1) product specifications materials 1.contact resistance 2.insulation resistance 3.withstanding voltage 4. vibration 5. shock 6.humidity 7.temperature cycle 8.salt spray 9.durability (insertion/withdrawal) shell insulator common terminal board circuit side ( n.c ) terminal phosphor bronze polyamide resin berylium copper berylium copper gold plating _________ gold plating gold plating _________ ul94hb _________ _________ part material finish remarks the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 112 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz typical data insertion loss v.s.w.r. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 0.045 3.0 4.0 2.0 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 v.s.w.r. 1.0 1.2 1.4 1.6 1.8 2.0 0.045 6.0 [ghz] [db] 0.8 0.6 0.4 0.2 0 3.0 4.0 2.0 isolation 45 40 35 30 25 0.045 6.0 [ghz] [db] 20 15 10 5 0 3.0 4.0 2.0 insertion loss v.s.w.r. v.s.w.r. insertion loss isolation normally closed (n.c)~ (not mated with the plug) open (n.o)~ (mated with the plug) isolation the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 113 receptacle product no. ms-147 (06) 1,500 pieces per reel embossed carrier tape dimensions circuit diagram ?13 ?380 ?80 2 16.4 12 4 16 7.5 1.75 ?1.5 2 unreeling direction 1,500 pieces per / reel unreeling direction 5.3 2-0.2 3.9 b 2.9 ?3.4 ?5 2.7 5.8 0.65 0.4 0.4 4.4 a g c g 5.4 ms-147 g b g c a plug g b g g g gg c a ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz part number ms-147 ( 06 ) ms-147 ( 01 ) hrs no. cl358-150-5-06 cl358-150-5-01 packaging 1,500 pieces / reel 50 pieces rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz 114 plug 13.6 13.7 ?1.8 10.2 ?4.8 11.25 7 8 right angle (1.5d-hqew) part no. ms-147-c(lp)-1 ms-147-c(lp)-4 hrs no. cl358-0155-9 cl358-0182-1 rohs yes b pcb mounting pattern b metal mask dimensions 0.8 4 6.6 3.6 0.65 0.8 2.4 6 4 6.6 3.6 0.65 5.85 3.8 0.8 0.8 sma conrersion adapters 6.3 1/4-36uns-2a 12 6.29 6 24.29 ?4.71 ms-147-sma jack conrersion adapters part no. MS-147-HRMJ-1 ms-147-hrmj-3 hrs no. cl358-0151-8 cl358-0218-7 rohs yes 8.3 6 6.8 2.7 ?3.4 15.5 part no. ms-147r-hrmj hrs no. cl358-0212-0 rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 115 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz q max. temperature : 260 ? w duration of peak temperature : 5sec max. e base peak temperature : 240 ? ~ 255 ? r 220 ? or over : 50sec to 80sec max. t 180 ? to 200 ? : 120sec min. recommended temperature profile 5sec max. 0 100 180 200 260 220 120sec min. 50sec to 80sec temperature (?) 260? max. using typical solder paste o-ring example of application note: mounting example the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009 116 ms-147 series interface rf connector with switch, 3.9mm high, dc to 6ghz precautions 1. plugs 2. not washable. 3. design the mounting holes with sufficient clearance to protect the switch from being subjected to excessive force should the board be dropped. 4. for rf interface application for portable terminals, cover the plug entry with a rubber cap to keep dust out when no plug is inserted. 5. be sure to fully insert the plug until it contacts part p. p recommended nozzle dimensions ?1 ?3 ?1.5 part no. ms-147-c(lp)-1 ms-147-c(lp)-4 MS-147-HRMJ-1 ms-147-hrmj-3 use plug harness type plug harness type sma conversion adapter sma conversion adapter effective mating length 0.87mm 0.87mm 0.87mm 0.87mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative. 04/2009
|
